Model #11087729701 KENMORE ELITE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Door Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

I have an Kenmore elite dryer He5 - with error code f01 110.87729701

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you. 

I have attached the diagram of the board.


Primary Control Failure
F:01 flashes when there is a primary
control failure.
? Replace the machine control electronics.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 22, 2015
Q:

Error Code F01 11087729701 Kenmore Elite Residential dryer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model11087729701; the “F01” error code indicates that the machine control board may need to be replaced, part# W10174746. I have posted a link below of the machine control board key#56.

I trust this information will help you, Thank you for choosing Sears.

Read More
Jeff Wallace Jr -
Sears Technician
December 02, 2014
A:

have they changed up part# w10174746 from the original part on the machine

Read More
danielle -
May 18, 2015
See more answers
Q:

My dryer screeches VERY loudly. 11087729701 Kenmore Elite Residential dryer

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore dryer.

From the information you have provided above, there are a few parts that can cause this annoying screeching sound. It can be due to a bad belt, grinded down support rollers, or the idler pulley. If any of these parts are damaged it will cause the screeching sound.  In your situation your model actually has all these parts in a kit for about $40. I would suggest going with the kit so you can knock it all out at once rather than replacing one thing and then another part fails, they work hand in hand with one another so it might be a good idea to just purchase the kit. If you didn’t want to get the kit the belt and support rollers would be the most common to cause this sound. Part number for the dryer repair kit is 4392067.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
January 13, 2015

Top Parts