Model #11087683110 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore gas dryer model 11087683110. Clothes take way too long to dry. Why?

A:

Having a properly working dryer is very important. The dryer taking too long to dry the clothes is concerning. I found some information for you that I am hoping will help you with the dryer. I am adding the link below to help you with your question while you wait for your expert response. It may take two business days for your expert to respond. I do hope that this will help you with the dryer.

Read More
Marc -
February 26, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your dryer not drying the clothes properly. We are here to help. I suspect the dryer flame is short cycling. The flame stays on about 2 minutes and off. That will not heat the dryer properly. Marc provided you a good link on this problem. I recommend that you use it. Just click here to view that link. I hope this helps.

To order dryer parts, please visit SearsPartsDirect.com with the model number.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
February 26, 2013
See more answers
Q:

Why won't my Kenmore dryer start?

A:

I know this information is important for you to have. I researched your question and was unable to locate information that would be helpful. An expert will respond shortly. Have a great day!

Read More
Jackie S -
February 05, 2012
A:

Following a video you have about changing the belt, I pulled the lower panel and loked in. The belt is still in place.. When I attempt to start it, I can hear the motor try to rotate the drum but clearly it isunable to do so. Hence it appears that the problem may be mechanical. Again, I'd like an idea of what it might be, and whether it would make sense to haev a tecnician come out and repair it. And, indeed, there may be two problems- a hard turning drum, and something causing perhaps the thermistor to open for a time after the dryer has run.

Read More
john -
February 05, 2012
A:

If you can't rotate the drum in a counterclockwise direction freely, this would indicate some thing is preventing the motor or drum from rotating. It could be a seized motor, object jamming the blower wheel or a seized drum support roller. When trying to start it do you hear any humming from the motor? You could have a broken belt or the motor has failed. I believe its your motor because it slowly stated doing this. You'll need to take the dryer apart to verify. The motor is part number 279827 priced at $124.08. I don't believe its cost effective to repair this due tot the age of the unit.

Read More
Tykara -
Sears Technician
February 06, 2012
See more answers
Q:

I have a kenmore gas dryer LP gas. Need to convert to NG. Model 11087683110 , Where can I get kit?

A:

Hi, I see you want a kit for your Kenmore gas dryer LP gas. You can visit our PartsDirect.com website. I attached the link below. Hope this helps!

Read More
Dezeray S -
July 20, 2010
A:

Due to the age of the product, the conversion kit is no longer available by the manufacturer. Below I have provided a link that has additional information.

Link

Read More
Rgabriella02 -
Sears Technician
July 21, 2010
A:

You might take a moment to look over the dryer -particularly the back of the dryer -a conscientious conversion would have included keeping the original NG parts with the dryer.

Read More
LookOver1 -
July 21, 2010
See more answers

Top Parts