Model #11087572110 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

No heat 11087572110 Kenmore Gas dryer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the dryer not heating.
 
Glad to help out.   Im  looking at your Kenmore Dryer model number 11087572110.

The gas valve complete may be bad but it could be just the ignitor.   The ignitor can work but if it isn't getting enough charge then it doesn't work fully.   There is also coils there need to be checked.

First thing for safety and concerns to keep dryer running well is to check the lint screen and vent of air flow going out of the house.   If clogged up it could cause heating problems on any dryer.
 
To prevent a Blocked Vent Hood, once a year: 
 
1.  Clean any lint blockage from the exhaust vent hood.
2.  Make sure the vent hood flappers move freely.
3.  Check for screen/grate openings that allow bird or rodent nests.
4.  Replace exhaust vent hood if damaged.
5.  Check for good air flow while running the dryer.
Note: Poor airflow or decreased airflow indicates further vent system cleaning is needed.
All items can be checked with a volt meter for continuity.
 
When a gas dryer isn't heating there are a few things to look at.
 
In the burner system you have
 
1.  The ignitor key number 4 on burner page
 
2.  The pair of coils 13 & 14 on burner page

3.  Gas valve assembly number 10 on burner page
 
Behind the blower there is
 
3.  The thermistor key number 41 on blower page
 
4.  The thermal fuse  key number 39 on blower page.

If you can check those great so you will know.   Maybe wise just to buy a complete gas valve assembly

Burner assembly for the model 11087572110.

Blower page for model 110.84572110.




Read More
Larry L -
Sears Technician
May 20, 2014
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the dryer not heating.
 
Glad to help out.   Im  looking at your Kenmore Dryer model number 11087572110.

The gas valve complete may be bad but it could be just the ignitor.   The ignitor can work but if it isn't getting enough charge then it doesn't work fully.   There is also coils there need to be checked.

First thing for safety and concerns to keep dryer running well is to check the lint screen and vent of air flow going out of the house.   If clogged up it could cause heating problems on any dryer.
 
To prevent a Blocked Vent Hood, once a year: 
 
1.  Clean any lint blockage from the exhaust vent hood.
2.  Make sure the vent hood flappers move freely.
3.  Check for screen/grate openings that allow bird or rodent nests.
4.  Replace exhaust vent hood if damaged.
5.  Check for good air flow while running the dryer.
Note: Poor airflow or decreased airflow indicates further vent system cleaning is needed.
All items can be checked with a volt meter for continuity.
 
When a gas dryer isn't heating there are a few things to look at.
 
In the burner system you have
 
1.  The ignitor key number 4 on burner page
 
2.  The pair of coils 13 & 14 on burner page

3.  Gas valve assembly number 10 on burner page
 
Behind the blower there is
 
3.  The thermistor key number 41 on blower page
 
4.  The thermal fuse  key number 39 on blower page.

If you can check those great so you will know.   Maybe wise just to buy a complete gas valve assembly

Burner assembly for the model 11087572110.

Blower page for model 110.84572110.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 


Read More
Larry L -
Sears Technician
May 20, 2014
See more answers
Q:

Why does new thermostat sometimes fail to regulate gas dryer temperature?

A:

Thank you for your question and I understand your concern.

It would be odd to see the operating temperature to spike at times if the burner is cycling off and on in order to maintain an operating temperature after replacing the operating thermostat and thermostat heater. Since you said there is no venting issues, I would replace the high limit thermostat and then see if continues to blow the thermal fuse. The high limit thermostat is part #279048 which can be ordered from Searspartsdirect.

If it continues to blow the thermal fuse, then the gas valve could possibly be sticking open at times.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

 

Read More
Joey S -
Sears Technician
November 26, 2013
A:

Thanks for you prompt response. Sticking gas valve is a new one for me. But it sure doesn't stick when the fuse goes open and isn't the cycling thermostat in series with the fuse? I guess I must have the wrong picture. My confusion is that that the high limit thermostat set to 205F would seem to be a moot issue since the thermal fuse is set below that, isn't it? I used both the factory fuse and other fuses that cutoff at e.g. 170F, well above the cycling thermostat at 150F. I once caught it in the act and just in time to shut it down before the fuse blew.

Read More
Anthony -
November 26, 2013
A:

Problem remains after replacing high limit thermostat. What's next? Old part tested bad before replacement. Still confused. Can you help? Thanks

Read More
Anthony -
December 04, 2013
A:

Anthony: If the thermostats are in the correct position and wired up correctly, I suggest calling a service technician to diagnose and repair your dryer.

Read More
Joey S -
Sears Technician
December 05, 2013
See more answers

Top Parts