Model #11087570120 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 694670 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

what is the rating of the thermal fuse for a kenmore dryer model 11087570120

A:

I see you would like to know what is the rating on your Kenmore Dryer. While you are waiting on an expert to answer your question. You can visit SearsPartsDirect.com website to set services with the Sears team. I attached the link below. Hope this helps! Good luck.

Read More
Dezeray S -
September 25, 2010
A:

The rating of the thermal fuse in this Kenmore dryer is 195 degrees F. The part number of that component is 3392519. You can order the fuse from the Sears PartsDirect website.

If you need more help, reply with additional details.

Read More
Lyle W -
Sears Technician
September 27, 2010
See more answers
Q:

Which part should I replace when I see the ignitor glowing and fading off without any flame ignition?

A:

The symptom that you are describing indicates weak solenoid coils which are mounted on top of the gas valve assembly. I recommend having both solenoid coils replaced. You can purchase a kit which includes both coils. Part #279834 which can be ordered at Sears Parts Direct. I added the link below with the coil kit already looked up. The kit is only $19.82 and the coils are easily replaced from the front by removing the lower access panel and removing the coils from the gas valve. It will likely just have a bracket to remove and the coils will lift off. NOTE: Unplug the dryer before removing the access panel.

If you call for service, the cost will most likely run $180.00.

Read More
Joey S -
Sears Technician

Top Parts