Model #11087561601 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Dryer Model #11087561601 beeps three times as long as I hold start, but doesn't run. 11087561601 Kenmore Residential dryer

A:

Thank you for choosing SearsPartsDirect. I can certainly understand how frustrating it can be when your dryer is not working properly. I did look into the model number you have provided and I have found information to assist you. 

It sounds to me like the door switch or control board might be going bad. I have found the diagnostic cycle to assist in seeing what part is bad. 

Let me know if this helps.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 07, 2014
Q:

I have a kenmore HE2 dryer. I get a code of f 26 What does that mean? 11087561601

A:

Error codes can sometimes be frustrating. I found some information for you that I am hoping will help you. I am adding the link below to help you with your question while you wait for your expert response. It may take 24-48 hours. I do hope that this will help you.

Read More
Marc -
December 30, 2012
A:

I know that it can be very difficult to have issues with your dryer. The F26 error code indicates that the control board in the dryer detects a drive motor system failure. This could be caused by a wire harness problem, a bad drive motor or a control board failure. You did not indicate whether the dryer will restart immediately. An intermittent problem such as this could be difficult to diagnose. I recommend calling a service technician to diagnose and repair this type of problem. If you would like to schedule service, just click on this link: Sears Home Services . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
December 31, 2012
A:

My motor assembly was replaced and my dryer will not start flashes code F26 still

Read More
Wesley and Stephanie -
May 14, 2014
See more answers
Q:

HE2 dryer. Drum sounds loose. Rattling sound. 11087561601 Kenmore Residential dryer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014

Top Parts