Model #11087471810 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Help: Propane conversion: Kenmore 110.76934692 dryer (from Nat. gas)

A:

Manage My Life website is always a great place to ask just about anything and get an expert answer. While you are waiting on an expert to answer your question, I did manage to find a great link. I have attached the link below. Hope this helps!

Read More
Dezeray S -
February 09, 2011
A:

The older dryer that you have (model 110.87471810) used LP conversion kit part 49572. I provided the instructions for that kit in the images below. That kit had the blocking pin and 2 orifices as you describe in your details. One orifice was for LP gas (#54). The other orifice in that kit was for Butane (#55).

The other dryer (model 110.76934692) uses LP conversion kit 695237. That kit has the blocking pin and 2 orifices also. One orifice is the #54 LP orifice. The other orifice in that kit is for high altitude conversion (#62).

Those kits should be the same except for the second orifice.

NOTE: A qualified installer should complete the conversions on your dryers.

Although we do not normally recommend that you use parts other than those recommended for the model by the manufacturer, your installer may be able to use the LP conversion parts from your older dryer to convert the new dryer is the parts are identical.

I hope that this information helps. If you need more assistance, reply with additional details.

If you need a qualified installer, you can check with your local gas supplier.

Read More
Lyle W -
Sears Technician
February 11, 2011
A:

Here is the final image.

Read More
Lyle W -
Sears Technician
February 11, 2011
See more answers

Top Parts