Model #11087405100 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • 694670 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore dryer seal?

A:

I understand that you want to install your dryer seal on your dryer. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day.

Read More
Alina F. -
August 07, 2011
A:

There is a rear felt seal on this dryer. It is part number 239087. You can order that part from the Sears PartsDirect website. Here is a link for a brief video that shows how to replace that felt seal: Video: Dryer Felt Seal Replacement . NOTE: The video advises you to allow 20 minutes for the adhesive to dry after installing the new seal. I recommend that you allow 8 hours for the adhesive to dryer before reassembling the dryer.

This should be the information that you need to complete this repair. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
August 09, 2011
A:

Thank you both, you both solved the issue. I ordered the front and rear seal, I'm hoping this will make the clothes dry on the first try . Problem solved for now, might be back during installation time. Thanks guys! :)

Read More
jgcalifornia -
August 09, 2011
A:

Is there no manual for this model? 11087405100

Read More
jgcalifornia -
August 09, 2011
A:

I did not find a manual available for that dryer. It appears to be a commercial model. The installation guide is no longer available as a replacement part through the Sears Parts system. There are no online documents available for that older model. Sorry that we can't help you with that manual. If you need anything else, let us know and we will try to help.

Read More
Lyle W -
Sears Technician
August 10, 2011
A:

so i just received part# 279264, which is the superseded# for the dryer. What seems weird is PART NUMBER: 349462 says Bearing and seal kit, and what i received is a tube of seal all with a felt pad. This one is for the front felt seal. Just want to make sure this is correct.

Read More
jgcalifornia -
August 10, 2011
A:

The part 279264 is shown as KEY 38 in the top parts drawing that I provided in the image below. That part is attached to the opening on the front panel. The bearing on the front of the dryer drum is part 3394508 (substituted from original part number 297936). That bearing is shown as KEY 62 in the bottom parts drawing. If you need more help, reply with additional details.

Read More
Lyle W -
Sears Technician
August 11, 2011
A:

yes, I'm aware of the specs, but according to this link- http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Dryer-Parts/Model-11087405100/0582/0151200/00016485/00002?blt=06&prst=&shdMod= #38 is listed as Bearing and seal kit part# 349462. I just wanted to replace the seal, and not sure if what i did get is correct.

Read More
jgcalifornia -
August 11, 2011
A:

That kit will contain the felt seal for the front of the dryer.

Read More
Lyle W -
Sears Technician
August 12, 2011
A:

all installed and working great. Thank you again for the help!! :)

Read More
jgcalifornia -
August 13, 2011
See more answers

Top Parts