Model #11087371100 SEARS Laundry Appliances Division (26)

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Is part# 279137 the right part to order?

A:

Yes, part number 279137 is the correct coils needed for the gas valve for your model gas dryer.

NOTE: Disconnect the power cord from the power source before removing the toe panel.

Read More
Joey S -
Sears Technician
July 07, 2008
A:

Where can I get installation instructions for 279137

Read More
James -
February 05, 2013
See more answers
Q:

Why is my Kenmore dryer not heating & the timer not advancing?

A:

With the lower toe panel removed, start the dryer & watch the igniter. If the igniter glows & cuts off without lighting the gas this would usually indicate the gas valve coils are weak & will need to be replaced. For this type of repair be sure to disconnect the electrical power & turn off the gas to the dryer. If the timer is set in the auto dry cycle, it will not advance if the dryer is not heating. Once you repair the dryer, the timer should start advancing. It is possible that your old timer is good. If you need further assistance please resubmit your question.

Read More
biker dave -
Sears Technician
July 01, 2008

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show