Model #11086992100 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Dry Rack
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What would cause my Kenmore dryer to only hum and not start when I press start?

A:

If you’re hearing the drive motor hum from below the drum when you press start, the problem is not the start switch. It is more likely to have motor issue or a friction issue with the drum. It could also be voltage supply issue or a loose or bad connection at the motor too.

Open the door and reach into the drum and begin rotating it counterclockwise (CCW) and then shut the door and then see it will start. If it continues to only hum when start is pushed I recommend calling a service technician to diagnose and repair your dryer. You could also try this: Open the door and locate the door switch plunger and push it in and keep pressed in. While holding the door switch in start rotating the drum counterclockwise (CCW) and then have someone push the start button. Be sure to remove your hand quickly if it begins to rotate on its own. Then release the door switch and shut the door and then press start again to see if will start up on its own.

If continues to hum again and not start I recommend calling a service technician to diagnose and repair your dryer.

Read More
Joey S -
Sears Technician
January 07, 2010
Q:

How do I replace the drum rollers on my Kenmore dryer?

A:

Please see the images provided below for the information you requested on replacing the drum rollers for your Kenmore dryer.

Read More
biker dave -
Sears Technician
June 25, 2009

Top Parts