Model #11086980800 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Throwing Breaker 11086980800 Kenmore Electric dryer

Q:

Kenmore dryer heats up but no air or drum movement 86980800

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dryer and I do understand your frustration. Glad to help out. I'm looking at your model number 11086980800 and first you will want to verify that the motor has powering going to it. Here is a link that will help with additional troubleshooting. From your description I suspect that the dryer has a failed thermal fuse since the dryer appears to not be power. If the temperature gets too hot the thermal fuse will disruption the power going to the machine. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
February 17, 2015
Q:

Kenmore Electric Dryer not heating

A:

I understand that your Kenmore Electric dryer is not heating. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
April 05, 2013
A:

Thank you for your question.  I am sorry you are having a problem with your Kenmore 110.86980800 dryer.

Caution: Before attempting any repair, unplug the washer from the wall. 

If the dryer is running then the thermal fuse is okay. 

The not heating problem can be as simple as one breaker is tripped.  If one breaker is tripped then the dryer might have 120 volts to run the motor but not have 240 volts for the element.  First check the two circuit breakers supplying voltage to the dryer. 

The other possible causes of the no heat problem would be the control thermostat, hi-limit thermostat, thermal cut-off or even a bad element.  Each of these can be checked with a meter for continuity.  All of these parts are located behind the rear panel. 

You can reply below with any additional details for further assistance. 

You can also have the problem repaired in your home by a Sears technician.  Here is the link: Sears Home Services Dryer Repair

Read More
Fred M -
Sears Technician
April 07, 2013
A:

Why do I have to unplug the washer when the dryer not heating up is the problem?

Read More
Michelle -
May 30, 2014
See more answers

Top Parts