Model #11086762701 KENMORE ELITE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Leaking water inside drum. 11086762701 Kenmore Elite Residential dryer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dryer is leaking water.

 It sounds to me like you may need to replace the water valve it is leaking. 

W10044596 is the replacement part number.

  
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 23, 2015
Q:

Dryer not heating 11086762701 Kenmore Elite Residential dryer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model 11086762701; you can unplug the dryer power cord and remove the heater element when the dryer is not hot. Once you have removed the heater element you can test it for continuity using a multi meter if the test shows continuity then the element is ok, if the test reads no continuity then the element may need to be replaced. I have posted a link of the element to view the link click here.

 

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 12, 2015
Q:

Kenmore dryer model 110.86762701

A:

It can be difficult to understand an error code on an LCD screen. While your waiting for an expert to respond if you choose to schedule service you could visit the Sears Home Services website, I attached the link below. I hope your issue gets resolved!

Read More
Jackie S -
May 22, 2011
A:

Hi Shawn,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your dryer.

I am unaware of any error codes that resemble a YES or a YE5.

You did not indicate whether or not the dryer would run. I will assume it will not start. Typically if a dryer beeps when start is pressed and will not run this indicates an issue with the door switch.

I recommend activating the diagnostic test mode and checking for Active Fault Codes and performing the Door Switch Test. I have included an image below that details this procedure.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Try these diagnostic procedures and let me know what you find. If I may be of further assistance as more details become available, please reply to this post. Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
May 24, 2011
See more answers

Top Parts