Model #11086694100 KENMORE Residential Dryer

  • Console Panel
    3 Results
  • Limited Edition Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Dryer Top Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Elite dryer 11086694100 Kenmore Belt drive washers

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Henry -
June 17, 2013
A:

Thank You for choosing SearsPartsDirect.com

I know that it can be very frustrating to have issues with your dryer. The "PF" in the display indicates a power failure. If the power supply is lost for any length of time, it will display "PF" to indicate a power failure. If the power cord is not fitting securely in the receptacle it can cause an intermittent "PF" to display. Check the power cord connections. Generally speaking you should be able clear it, reprogram and start the dryer. If you are not able to, then it could have a control board failure and I'm showing these parts are no longer available due to the age of this dryer. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using SearsPartsDirect.com

Read More
Desirea -
Sears Technician
June 17, 2013
See more answers
Q:

Dryer runs 30-60 secs and stops 11086694100 Kenmore Belt drive washers

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
anna -
June 17, 2013
A:

Thank You for choosing SearsPartsDirect.com

I know that it can be very frustrating to have issues with your dryer. The "PF" in the display indicates a power failure. If the power supply is lost for any length of time, it will display "PF" to indicate a power failure. If the power cord is not fitting securely in the receptacle it can cause an intermittent "PF" to display. Check the power cord connections. Generally speaking you should be able clear it, reprogram and start the dryer. If you are not able to, then it could have a control board failure and I'm showing these parts are no longer available due to the age of this dryer. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using SearsPartsDirect.com

Read More
Desirea -
Sears Technician
June 17, 2013
See more answers
Q:

Electric kenmore dryer stops running after about 30 sec 11086694100 Kenmore Belt drive washers

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
anna -
June 17, 2013
A:

Thank You for choosing SearsPartsDirect.com

I know that it can be very frustrating to have issues with your dryer. The "PF" in the display indicates a power failure. If the power supply is lost for any length of time, it will display "PF" to indicate a power failure. If the power cord is not fitting securely in the receptacle it can cause an intermittent "PF" to display. Check the power cord connections. Generally speaking you should be able clear it, reprogram and start the dryer. If you are not able to, then it could have a control board failure and I'm showing these parts are no longer available due to the age of this dryer. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using SearsPartsDirect.com

Read More
Desirea -
Sears Technician
June 17, 2013
See more answers

Top Parts