Model #11086470800 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Where is Part 4391960 located? 11086470800 Kenmore Electric dryer


Thank you for choosing and being a valued member. I can certainly assist you in locating the instructions to test the heating element in your dryer. 

 If the dryer is not heating you could be experiencing an issue with the thermal fuse (3392519), operating thermostat (61894 ), high limit thermostat(341195)and thermostat 660039 . If you have an ohms/volt meter you can test these parts for the proper continuity. To test the parts, disconnect both wires from the components and test them at room temperature. The ohms reading for these components should be zero ohms. If the high limit thermostat is faulty, then replace the thermal cut-off as well and vice versa. They two components work together and come as a kit. If they component listed above test good, then the issue may be with the heating element (4391960 ) and I recommend testing it as well. You'll want to get a reading of 7.8 - 11.8 ohms for it to test good. 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
December 18, 2014

Top Parts