Model #11086356100 KENMORE Residential Dryer

  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Top And Console Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


cannot remov dryer lint filter


I'm sorry that you are having difficulties with your lint filter. I did some research for you at and found an expert answer to a similar question that may assist you until your expert can respond. I have attached the link below.

Read More
James -
January 12, 2011

From what you're describing it sounds like the lint screen housing is binding up the lint screen preventing it from coming out completely, or too much lint has accumulated on the screen & when you tried to pull it out it got in a bind & is stuck there. This is pretty rare but not unheard of. If you cannot force the lint screen out manually, the complete duct assembly will have to be replaced along with the lint screen.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: sears home service

If you decide to repair the unit please see the instructions below.

First, disconnect power to the dryer.

Carefully pull the dryer out & remove the rear panel, use caution around sharp metal edges. You will see the lint chute on the left. Follow the diagram provided below for removal instructions.

  • lint screen 8557884 $29.72
  • chute 279505 $65.87

order parts here

The first responder's link is for another symptom.

Read More
biker dave -
Sears Technician
January 13, 2011
See more answers

Top Parts