Model #11086155100 KENMORE Residential Dryer

  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Top And Console Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

need wiring diagram

A:

Having to get a wiring diagram for a Dryer or any appliance can be challenging. While you are waiting for an expert to reply I recommend visiting the Sears parts direct website were you can view parts listing as well can find a direct number to speak with a parts associate regarding your Dryer. Below I have provided thee link.

Read More
Priscilla V -
March 21, 2011
A:

I provided the wiring diagram for this dryer in the image below. This copy is from a microfiche machine since the dryer is an older model. It is the best reproduction that I have.

This information is intended for service technicians. Follow electrical safety guidelines when using this data. Unplug the dryer to disconnect electrical power when accessing internal components.

If you need parts for this dryer, you can order them from the Sears PartsDirect website.

If you need more help, reply with additional details and we will assist you further.

Here is a link for the Sears Service website in case you need it: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 22, 2011
See more answers
Q:

Why does my Kenmore model 110.86155100 electric dryer get hot but there is very little heat transferred to the drum or out the vent?

A:

From the description of your problem the first thing I'd recommend you check is if the blower is working.

You say the drum doesn't get hot but the rear of the dryer does. Remove the vent hose and see if any air is coming out. It's possible this problem is caused by a broken belt or broken blower wheel.

If the air flow is strong out the rear exhaust then next check the drum is turning and the belt is okay. If there is no air flow then the blower wheel has most likely cracked and is not turning.

If the drum is not rotating most likely the belt has broken.

The top is hinged in the rear and is held down by two clips located about 2-4 inches in from the front corners. First pull the lint filter out and remove the two screws located there. Then with a putty knife push in and release the clips. With the top up you can visually check the belt is around the drum.

I hope this information helps to resolve this problem but if after making these checks you still have questions then submit another question with any additional details for further assistance with this problem.

Read More
Fred M -
Sears Technician
June 27, 2009

Top Parts