Model #11085088401 KENMORE ELITE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

HE4 model 11085088401 dryer beeps three times but doesn't start.

A:

It can be very aggravating when your dryer fails to operate and displays error codes. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
January 29, 2013
A:

Thanks Julio. I didn't get an error code. It just displays the time for the cycle.

Read More
David -
January 29, 2013
A:

Hi,

Thank you for asking this question and allow me to answer it this way.

The door switch is not functioning correctly or the catch is not engaging the switch. The switch can be removed after some dis-assembly of the dryer, see the photos. You can do the switch replacement yourself and save some money. Here is the link for the switch, Kenmore HE Dryer Door Switch .

I hope this answer is useful and that it helps you correct the problem with your appliance.
Thank you for using ManageMyLife.

Read More
Bill__W -
Sears Technician
January 30, 2013
A:

Here is the instruction, Remember to follow the safety precautions.

Read More
Bill__W -
Sears Technician
January 30, 2013
A:

I am having the same issue, I have replaced the door switch and still the same results. What else could be going one. I got all good indications, the drum will just not start and turn.

Read More
James -
December 27, 2015
See more answers
Q:

Dryer only works on "normal" cycle 11085088401 Kenmore Elite Residential dryer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model 11085088401; it sounds like the electronic control board may need to be replaced. The electronic control board governs the functions of the dryer so when it fails it can cause the cycles to become unresponsive and only work certain cycles. I have posted a link of the control board to view the link click here.

 

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
August 16, 2015
Q:

Continuos end of cycle signal 11085088401 Kenmore Elite Residential dryer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when the end of cycle signal is not turning off.

 I have located testing information that should help determine the part to replace. 

Click here for the information. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 04, 2015

Top Parts