Model #11084722400 KENMORE Residential Dryer

  • Bulkhead Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Top And Console Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

what is the ampreg or watts of this model 11084722400 Kenmore Residential dryer

Q:

Kenmore Dryer Model Number: 110.84722400

A:

I know how important it is to have the dryer lint free so that there is no air restriction. I am not sure what lint box can be used, I am adding a link below to help you in cleaning out the lint out of your dryer. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
January 25, 2012
A:

Thank you for your question and I understand your concern. I see by the model number that you have 120 volt electric dryer. Just to let you know in case the dryer is new to you, since it operates on 120 volts, the dryer will take twice as long to dry a normal load compared to 240 volt electric dryer.

They make an indoor vent box that you put water in to catch lint that passes through the lint screen.

I added a link to one of the better traps using water. I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
January 26, 2012
A:

what is the capacity of this dryer? I cannot find it in the manual. Thanks!

Read More
Charles -
November 28, 2014
See more answers
Q:

I have a Kenmore 70 series dryer that wont turn on??

A:

When it comes to our appliances that start to have problems all we can think about is money out the window to fix them. While you are waiting on an expert to answer your question, I suggest you set service with a Sears technician. I have attached the link below. Have a nice day!

Read More
Dezeray -
August 20, 2012
A:

The previous buzzer problem might have been caused by a motor switch problem but the not starting problem can be caused by several parts. The problem might be the timer, door switch, push to start switch or even the motor. A meter would be needed to check and confirm what the problem is. The light works so the door switch is likely okay but not 100% certain. The door switch and push to start switch can be by-passed to check if caution is used. I can tell you more about this if you would like to do-it-yourself. The wiring diagram below may be helpful to you. Remember to unplug the dryer first before making any checks.

Read More
Fred M -
Sears Technician
August 21, 2012
See more answers

Top Parts