Model #11082984110 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Console Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness Parts
    3 Results
  • Water System
    3 Results
  • Gearcase
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

lid switch replacement 11082984110 Kenmore Automatic washer

Q:

Motor runs, pump works, but.... 11082984110 Kenmore Automatic washer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.”

 

Read More
Natasha12 -
Sears Technician
December 05, 2013
Q:

How do I remove the cam to replace the agitator dogs?

A:


On your model washer grab the upper auger and the lower agitator and gently jerk the two apart and it should separate. If it does not you may need a pair of needle nose pliers and grab one of the tab (ears) of the cam and pull up hard.

Read More
expert -
Sears Technician
February 29, 2008
A:

This is not correct! Do not pull it apart it is threaded. I held the lower agitator and grabbed the upper auger with needle nose pliers. I turned the upper agitator counter clockwise and it unscrewed.

Read More
sirbarker32 -
March 26, 2011
A:

I can not get the agitator cam assembly part separated from the lower agitator part. I have tried pulling and have tried the counter clockwise (with significant force), but it is almost ask if it is 'frozen", which seems for plastic on plastic. Any suggestions on how to loosen?

Read More
Jon -
January 25, 2013
See more answers

Top Parts