Model #11082983800 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Console Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Gearcase And Motor
    3 Results
  • Gearcase
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why did my Kenmore model 110.82983800 washer blow two starting capacitors?

A:

If two capacitor have blown then the motor switch is most likely the cause of this problem.

You will have to remove the washer cabinet to access the motor switch which is located on the motor.

One thing to note is the part number for the motor switch is 8529896 and will cost approximately $65.65 from the following link: Sears PartsDirect . The cost for the complete motor 389248 with switch is $155.76 from the same link.

The image below shows how to remove the cabinet and access the motor.

I hope this information helps resolve the problem but you can submit another question with any additional details for further assistance.

Read More
Fred M -
Sears Technician
August 01, 2009

Top Parts