Model #11082979100 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Console
    3 Results
  • Water System
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Will the perm press cycle work and not try to save/reuse the water on this unit 110.82979100 110.82979100

Q:

Need to change agitator on top loading washer. Sears 11082979100. How to remove and re-install?

A:

It can be a bit difficult when removing and replacing a part especially on a washer. I understand that you are having some difficulties replacing the agitator in your washer. I did some research for you at Managemylife.com and found a couple of expert answers to similar questions that may help until an expert can respond to your specific question. The link is attached below. I hope these links provided assist you. Have a great day.

Read More
Alina F. -
November 29, 2011
A:

The information that Alina F provide is correct. Just follow the instructions on the previous answer to remove and reinstall the agitator for your washer. If you need to order parts, just click on this link Sears Parts Direct

If you need further assistance, please reply to this thread.

Read More
AnneJ -
Sears Technician
November 30, 2011
See more answers
Q:

Kenmore washer model 110.82979100

A:

I'm sorry about the difficulties that you are experiencing with your washer. We all know just how fast the clothes can pile up. I did some research at managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond. I have attached the link below. If you would like assistance from a qualified technician I have also attached a link to searshomeservices.com. I hope these links will help until your expert can respond.

Read More
James -
February 02, 2011
A:

From what you're describing it sounds like you want to cap off the suds saver hose. This will be ok as long as you don't plan on using the suds saver option. On this type of drain hose you should be able to find something from a building supply center or hardware store that will work; like a rubber plug & a hose clamp or something similar. If you run into problems or have anymore questions please get back with us on this, thank you.

The first responder's link is not for this symptom.

Read More
biker dave -
Sears Technician
February 03, 2011
See more answers

Top Parts