Model #11082891130 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Bleach, Detergent And Rinse Dispenser
    3 Results
  • Water System
    3 Results
  • Wiring Harness
    3 Results
  • Gearcase
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Washer Capacity 11082891130 Kenmore Automatic washer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I do apologize due to the age of the product we do not have the capacity of the washer. After 5-10 years the manufacture stops giving information out on certain units.

You would need to measure the unit in order to get the capacity.

 

Calculate Washer Tub capacity


This is a geometric method to calculate tub capacity based on the cylinder volume formula. Unfortunately, the value could be as much as 25% off from the manufacturer stated capacity.

Why? Because the tub is not exactly a cylinder. The edge where bottom connected to the wall is not at 90 degree angle but smooth and rounded. The water line is not clearly marked and the bottom is not always flat. Finally, an agitator also takes capacity away from the tub.

This method can be used as a crude estimate but we do not recommend using it for comparisson when shopping for a new washer.

Determine your washer tub capacity by taking two simple measurements:

Top Loading Washer Tub Capacity Measurements

1. Use the ruler to measure the depth of the tub (indicated by the red line on the diagram)

2. Now find the distance accross the tub, the diameter (the green line on the diagram). Note that some tubs are narrow on top. In this case make the measurements INSIDE the tub.

Solution:

Tub Depth: in.   Tub Diameter: in.


You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
May 22, 2015
Q:

Kenmore Washer model 110.82891130 becomes unbalanced during rinse cycle

A:

A Washer is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Priscilla V -
October 31, 2011
A:

Hi Thomas,

Thank you for submitting a question to Manage My Life.

The way the suspension system is set up on this model of washer, the tub will freely move around if you manually move it. The lower outer perimeter of the outer tub is connected to the main frame with heavy duty springs. The lower outer & center of the tub is the only area directly linked to the main structure. What your describing sounds like the suspension springs are weak or the skate plate is out of position. The spin basket also has a liquid filled balance ring mounted to the top of it. If the balance ring has the fluid missing this will cause an out of balance condition also. I recommend checking the suspension system, skate plate & balance ring. Please see the images provided for more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Landell

Read More
Landell -
Sears Technician
November 01, 2011
See more answers
Q:

Which parts do I need to replace if the top portion of the agitator on my model 110.82891130 is not working?

A:

From the description you give the problem is most likely with the 80040 "agitator dogs" which can be replaced as a do-it-yourself project.

The image below will help you with this problem.

The 80040 agitator dogs can be obtained from the following link: Sears PartsDirect .

You can submit another question with any additional details for further assistance.

Read More
Fred M -
Sears Technician
February 23, 2010

Top Parts