Model #11082891110 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Bleach, Detergent And Rinse Dispenser
    3 Results
  • Water System
    3 Results
  • Wiring Harness
    3 Results
  • Gearcase
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

REMOVING TIMER KNOB & DIAL ON KENMORE 110.82891110 11082891110 Kenmore Automatic washer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when dealing with parts on the washer.
 
Glad to help out.   Im  looking at your Kenmore Washer model number 110.82891110.

The timer knob has to be pulled straight off.   You may just want to order a new timer knob also because the stem on the inside could get broken and usually does.   Either by hand or pair of pliers and just pull.

I have a picture of the control panel below.

1.  Unplug the dryer for your safetly

2.  Remove all the knobs.

3.  You will se key number 1 and key 14.  You have to remove the screw and nut on the back side.  1 on the top and 1 on the bottom of each corner.

4.  After the bolts are off remove the side panels and the top panel.

Picture of the control panel for the model 
11082891110
 

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
June 04, 2014
A:

knob for timer on washer UNSCREWS COUNTER CLOCKWISE

Read More
james -
August 21, 2015
See more answers
Q:

HOW TO REMOVER TIMER DIAL KNOB 110.82891110

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
A:

push knob in, turn counterclockwise to remove

Read More
james -
August 21, 2015
See more answers
Q:

Kenmore Automatic washer model #11082891110 won't spin or agitate 11082891110 Kenmore Automatic washer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to assist you with your Kenmore washer.  

From the information you have provided above, there could be one of two things to check on when you’re having this issue. First, I’d recommend replacing the motor coupler. This in a way acts like the belt connecting the motor to the shaft which spins and agitates the agitator. This is more common of a part to go out and not allow the washer to spin. If you replace the coupler and still have the issue the other part to replace will be the lid switch. if the switch is damaged it won’t allow the washer to fill, spin, or agitate. Seems to me like you’re leaning more towards the coupler. Part number for this is 285753A.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day 

Read More
Benny23 -
Sears Technician
December 22, 2014

Top Parts