Model #11082694530 KENMORE Residential Washers

  • Console Panel Parts
    3 Results
  • Top And Cabinet Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Miscellaneous
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Bleach, Detergent And Rinse Dispenser Parts
    3 Results
  • Water System Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Error Code PF 11082694530 Kenmore Automatic washer

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you're having with the error code on the washer. I know how concerning that is to have.

Generally the PF error code indicates a power failure, basically a drop in power to the washer. This might occur due to an external disturbance like a storm or power outage in the area. However, it could be caused by loose electrical connections. First, check your power cord and make sure it is plugged in properly. A GFI plug can cause this as well if you have one. (GFI) Ground Fault Circuit Interrupt (GFCI) outlet is designed to provide extra protection for wet areas. It does this by measuring the flow of electricity in both the hot (black) and neutral (white) wire. If the two are not equal, then there is electricity flowing somewhere else out of the circuit and the breaker disconnects the power. Because this error does continue to appear it could be caused by a failed or faulty PCB board. I highly recommend scheduling for a service appointment. This way a full inspection can be made before parts are ordered.

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-469-4663, or click here to be directed to the page to set up service.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.  

Read More
Jeff Wallace Sr -
Sears Technician
December 02, 2014
Q:

Remove the agitator cam assembly on a Lady Kenmore model 110.82694530

A:

Removing the agitator can be difficult with out an owners manual or instructions I researched your model number in the Manage My Life website can the model number you provided didn't appear. A suggestion I have while you are waiting on an expert to answer your question, You can visit Sears Home Services website to set service with a Sears technician. I attached the link below. Hope this helps! www.searshomeservices.com

Read More
Dezeray S -
October 30, 2010
A:

Thank you for your question.

I should be able to help you remove the agitator cam to replace the dogs.

  1. Remove the cap on the agitator.(key number 21 in the image below)
  2. Remove the bolt.(key number 2)
  3. Remove the cam.(key number 3)
  4. Replace the dogs.(key number 5)

The second image shows how the dogs fit into the cam. If you need further assistance, please add more details below.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
November 01, 2010
See more answers

Top Parts