Model #11082681110 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Console Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Miscellaneous Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Water System Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Spin cycle 11082681110 Kenmore Automatic washer

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can see how frustrating it can be to have your washer malfunction, but after researching model number 110.82681110. Your model does not have a belt. However, it does have a motor coupler that acts like a belt. This is what connects the motor to the gear case to allow the unit to spin. This part will most likely fix this issue. The part number for the coupler is 285753A.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
February 27, 2015
A:

My washer spins completely on the end spin cycle but either barely spins on the first spin cycle (after the wash cycle) or doesn't spin at all if the water level is high. Since it functions fine on the end spin cycle I don't suspect the motor coupler but wonder if this could be a timer issue although that seems unlikely too since it never spins fast enough to drain the water.

Read More
Elise -
November 09, 2015
See more answers
Q:

Kenmore washer model 110.82681110 Grinding Noise

A:

Having the washing matinee not working as desired is not always something you can get use to. I was able to find some general information upon you problem. I believe that it provides helpful tips upon what can be causing the noise. http://www.managemylife.com/mmh/questions/197216-why-is-my-top-load-washer-making-a-squeaking-noise

Read More
celene -
November 05, 2010
A:

From what your describing it sounds like the auger section of the agitator is slipping or the transmission has problems. I recommend replacing the agitator clutch dog kit. This is what controls the auger motion of the agitator. The kit comes complete with step by step instructions.

Please click on the attachment below.

Read More
biker dave -
Sears Technician
November 06, 2010
A:

Thanks, Biker Dave! For that price it's worth a try. Do you anticipate irreversible damage if it gets continued use while the part is delivered?

Read More
RogueTrader -
November 06, 2010
See more answers
Q:

How to remove and replace the washer dial?

A:

In order to remove and replace the timer dial will require removing the timer knob.

To remove timer knob:

  1. Push the timer knob inwards and then turn it counterclockwise (CCW) until it comes off.
  2. Pull the timer dial off.
  3. Reverse the procedure to replace the dial and to reinstall the knob.

Read More
Joey S -
Sears Technician
November 06, 2009

Top Parts