Model #11082194860 KENMORE Residential Washers

  • Top And Console Parts
    3 Results
  • Drive Parts
    3 Results
  • Pump Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Water System Suds Only
    3 Results
  • Miscellaneous Parts
    3 Results
  • Brake And Clutch
    3 Results
  • Gearcase/transmission
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I don't want to get rid of my Lady Kenmore Washer, I love it! The model #11082194860. I noticed a that after I wash 2 to 3 loads, the washer begins to leak a

A:

The washer having a leak can cause some water damage and I will be happy to help. I am adding a link below that describes a similar question to yours. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
January 21, 2012
A:

I know that it can be very difficult to have problems with your washer. There are many reasons that a washer will leak. The most common problem is usually the pump, but it could also be the drain hose. I would suggest that you check to make sure the drain hose is clear, draining properly, and connected tightly to the machine. You will also need to check the hoses that connect from the tub to the pump and from the pump to the drain hose. If these are all clear and connected properly, then you will need to check the pump. I would suggest that you remove any debris that might be stuck in there. If you are still having issues with the washer, then I would recommend that you schedule service.

If you need further assistance, please reply to this thread with more detail. Thank you for using Manage My Life

Read More
AnneJ -
Sears Technician
January 23, 2012
See more answers

Top Parts