Model #11082082110 KENMORE Residential Washers

  • Top And Console Parts
    3 Results
  • Drive Parts
    3 Results
  • Pump Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Water System Suds Only
    3 Results
  • Cabinet Parts
    3 Results
  • Brake And Clutch
    3 Results
  • Gearcase/transmission
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Stubborn agitator on Kenmore Washer

A:

I know that it can be very frustrating to have issues with your washer. The image below will provide the information on how to remove the agitator. If you don't feel comfortable doing this yourself, please click on this link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My Life.com.

Read More
AnneJ -
Sears Technician
November 08, 2013
A:

Image

Read More
AnneJ -
Sears Technician
November 08, 2013
A:

I am afraid you missed the point of the question. I know how to remove an agitator that wants to to be removed. I am dealing with an agitator that is stuck on the spindle or whatever due to (I assume) age and years of use. I need some expert "tricks" or tool recommendations to remove an agitator that is really stuck on.

Read More
Rick -
November 08, 2013
A:

Did you remove the bolt holding the agitator on? If so, then just pull up on the agitator. There is nothing holding it there. You can try WD-40 to help loosen it up, put you won't damage it. Please let me know if there is anything else you need. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
November 08, 2013
A:

Yes I removed the bolt thank you. It is definitely stuck on something. I have pulled up on it very hard and is not coming loose. Where would it be sticking, at the top? Thank you

Read More
Rick -
November 08, 2013
A:

Since you seem to know something about these machines let me tell you the original problem. Why I'm removing the agitator in the first place. The washer is an old model from the 1980s. Everything operates fine on the machine except it spins slowly especially with a heavy load even as few as four towels that are wet. Sometimes it eventually gets up to speed but sometimes not. My research led me to either the drive block or the clutch. What do you think?

Read More
Rick -
November 09, 2013
A:

This is a cluch problem. All of the machine that I have seen, that have this problem, replacing the clutch fixes it. You need to get the agitator off in order to do that. Try lifting up on the spin basket. Usually the lifting the basket will force the lower potion up. If this does not help, you can try spraying WD-40 into the hole and letting it sit. This should break up the rust on the shaft. After letting it soak for a while, try again to lift the basket. If this does not work, then the only way to remove it is to break it. The agitator is still available for this model so you can order a new one, but it is about $140.60. Please let me know if there is anything else you need. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
November 10, 2013
A:

Thank you. I rigged a rope around the agitator and used a 2x4 through a loop in the rope to try to lever the agitator up but to no avail. WD-40 has been in the hole for about a week. 1. Where is the agitatoe sticking? At the top of the shaft? 2. I ordered a clutch but it is a substitute part 285068 Shft-Cltch from Sears Parts Direct. Will this substitute part work? 3. If I have to break it off do I cut it at the top? Thank you.

Read More
Rick -
November 10, 2013
A:

Oh, by the way, do you know the part number for the agitator?

Read More
Rick -
November 10, 2013
A:

The agitator is sticking to the drive shaft. It is possible that the rust is so thick it just won't come off. As for the clutch the manufacturer is the one who changed the part so it will work for you unit. The agitator is part number 359071, which has been substituted for 350990. Please let me know if there is anything else you need. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
November 10, 2013
See more answers
Q:

Slow Spinning 11082082110 Kenmore Automatic washer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Yadira B -
July 25, 2013
A:

Thank you for using ManageMyLife.com. I'm sorry to hear of the spin issues you are experiencing with the washer, I know how frustrating that can be, especially if the clothes come out dripping wet.

After pulling up your Kenmore Washer, it appears it was manufactured in and around 1987, so it has a few years on it. I suspect that over the years, the clutch on the unit has worn and will need to be replaced. If the clutch is slipping too much, this will cause the washer to spin slowly by not allowing the brake to release properly.

I would recommend purchasing a new basket clutch and that should fix the issue for you. For your convenience, I have included a blue link below that you can click on to be directed to the PartsDirect page where you can purchase the replacement part.

Basket Clutch for model 11082082110

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, click here to be directed to the page to set up service.

If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using ManageMyLife.com.

Read More
Desirea -
Sears Technician
July 25, 2013
A:

It does have a few years on it (early '80s actually). I have a few years on me too and I'm ready for the junkyard either. Thanks for your response. Do you think the basket clutch would explain that the spin works fine on lighter loads and even speeds up somewhat on heavier loads after spinning slow a bit sometimes?

Read More
Rick -
July 25, 2013
A:

Thank you for using ManageMyLife.com and for the response. With the new information listed in the response by it picking up speed somewhat at times (and even speeds up somewhat on heavier loads after spinning slow a bit sometimes?), it may even tie back to the gearcase, motor, or a combination of those and the basket clutch. It will be extremely hard to tell for sure which part is intermittent without opening it up and checking with a multimeter.

I would recommend checking the various components individually or maybe even look at a replacement washer if it's causing too much issue with the spin.

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, click here to be directed to the page to set up service.

If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using ManageMyLife.com.

Read More
Desirea -
Sears Technician
July 27, 2013
See more answers
Q:

why doesmy washer drains only on the delicate cyclye?

A:

I know how important it is to have all of you appliances working proplery. While you are waiting for your expert answer, I have found a link that will provide some information and troublshooting for the issue. It sounds like the timer is going bad and it needs to be repalced. The link will tell you how to do this. I hope this link will help.

Read More
aashe -
August 05, 2011
A:

The washer only draining in the delicate cycle is odd.

The drain cycle circuit consist of the pressure switch, timer, solenoid, cam bar and lever on the pump being moved.

If the washer only drains in one cycle my first thought is that it would have to be a timer problem.

The 660693 timer is available but before spending $100 dollars on a 30 year old washer, lets consider what happens in spin.

There is a rear panel you can remove that may give you a better view.

In drain a solenoid on the "wig wag" is activated and engages a cam bar which moves a lever on the drain pump to enable the water to drain out.

If this only happens in the delicate cycle then the timer is at fault.

Brand new washers similar to this will start at about $329 dollars.

The timer is available from the following link: Sears PartsDirect .

Read More
Fred M -
Sears Technician
August 07, 2011
See more answers

Top Parts