Model #11082080600 KENMORE Residential Washers

  • Top & Console Parts
    3 Results
  • Drive Parts
    3 Results
  • Pump Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Water System, Suds Only
    3 Results
  • Cabinet Parts
    3 Results
  • Brake And Clutch
    3 Results
  • Gearcase/transmission
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Hot water only trickles into washer with selector on hot water wash, (apx. half cup per minute) previously flowed very fast. 11082080600 Kenmore Automatic washer

A:

Thank you for your question and I understand your concern.

If you are certain that you have a good volume and good water pressure coming out of the end of the hot fill hose where it connects to the back of the washer, the water inlet valve on the washer will need to be replaced even though the screens are clean and clear of debris.

 You can order the water inlet valve for Kenmore washer model 110.82080600 at Searspartsdirect.com

The water inlet valve for Kenmore washer model 110.8208600 is part #358277 which can be ordered from Searspartsdirect.com

NOTE: Disconnect the power cord from the power source before hinging the top open and accessing and replacing the water inlet valve assembly. 

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.  

Read More
Joey S -
Sears Technician
November 04, 2013

Top Parts