Model #11081810110 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Console And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Gearcase
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why is the agitator not spinning on my Kenmore washer?

A:

Overloading the washer is what usually causes clothes to get hung up in the agitator. The agitator is in neutral during the spin cycle & the clothes should be pushed up against the spin basket walls, away from the agitator. Let the washer fill & start agitating. Use something to push in on the lid switch so you can see inside the basket while the unit is running. If the basket starts to spin during agitation, the transmission or brake assembly has failed.

Read More
biker dave -
Sears Technician
June 24, 2009
A:

The model of my washer is 110.26902690 serial number CG0334714 The vertical part of the agitator will spin both directions when I spin it. the bottom part of the agitator will not spin.

Read More
Lisa -
October 23, 2012
See more answers

Top Parts