Model #11079832800 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8576353 Burner Assembly, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Where can I get the parts manual for a Kenmore gas dryer, model 110.79832800?

A:

Having the parts information for the dryer can be very helpful. I found the the parts information on SearsParts Direct here:[enmore Gas Dryer, 110.79832800 Parts Page]. Your expert will also help answer your question. It may take two business days for your expert to reply. I do hope that everything works out on the dryer.

Read More
Marc -
June 07, 2013
A:

Thank you for contacting ManageMyLife.com regarding a parts manual for your Kenmore gas dryer. I see Marc provided you with some excellent information. I'm happy to help you today.

I do not see a parts manual for this model. However, you can find the parts list diagram for your dryer at Sears PartsDirect. I provided a direct link to the parts list below.

Parts list for model 110.79832800

I really hope this information helps you today. Thank you for using ManageMyLife.com.

Read More
Korinna S -
Sears Technician
June 07, 2013
See more answers
Q:

Where to plug in wire in kenmore dryer

A:

Wiring for most of us is confusing. If you were looking for wiring connections for the power cord, I did locate a previous expert post with diagrams and instructions that may help. I attached the link below. Hope this helps!

Read More
Barbara H. -
February 18, 2011
A:

The number that you provided (W10034880) is the part number for an owner's manual that covers many different models of dryers. I cross referenced that part to a common Kenmore gas dryer that has a yellow and red wire (model 110.79832800). The wiring diagram for that dryer is shown in the image below with the yellow/red wire highlighted. That wire plugs into the P2 connector at pin 4. The other end of that wire connects to the moisture sensor bar assembly in the drum.

I hope that this is the information that you are looking for. If you need more help, reply with additional details and the full model number of your dryer.

If you are not able to reconnect the wires correctly, you can have a Sears Technician repair the dryer. Here is a link for the Sears Service website in case you need it: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 18, 2011
See more answers

Top Parts