Model #11077732792 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • 3402844 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My gas dryer has no heat even after replacing the ignitor 11077732792

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when there is trouble with the dryer.

Glad to help out.   Im  looking at your Kenmore  model number 110.77732792.

I would look at the coils that are next to the ignitor off the burner assembly.

 I have it on the link below.

Burner coil kit per model 110.77732792 

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
November 26, 2013
A:

Is there any other possibility before I order more parts?

Read More
Douglas -
November 27, 2013
A:


Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
Good afternoon Douglas.
 
It is most likely the coils and shouldnt need anything else.   There is an upgrade to that in that if it isn't the coils then would be the whole burner valve assembly that has the coils in it as a whole kit unit.
 
 
 If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
November 29, 2013
See more answers
Q:

Converting a gas dryer from propane to natural gas

A:

I think its great that you are wanting to do some repairs on your own. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
February 07, 2013
A:

My mest suggestion would be to have this done by a techncian but the image below contains the instructions to convert a natural gas dryer to an LP dryer.  Reverse the directions.  The blocking pin is the part you will need to remove to convert back to natural gas.  I hope this helps.  Sears Home Services is a link to schedule a service call if you decide to not do-it-yourself. 

Read More
Fred M -
Sears Technician
February 07, 2013
See more answers
Q:

my kemore series 70 dryer does continues onto next drying option when it completes drying load

A:

The Managemylife web site is a good resource of information to find out what may be happening and what options are available to you. I'm sorry to hear about the difficulties with your Kenmore Series 70 dryer. I did some research at Managemylife website and found this expert answer to a similar question that may help until your expert can respond. I have attached the link below so you can check it out.

Read More
James -
July 28, 2012
A:

If you decide to schedule service , here is the link to SearsHomeServices.com.

Read More
James -
July 28, 2012
A:

The most likely cause of this problem is a bad timer but the push to start switch is also a possible cause. The start switch can be checked with a meter is one is available. You can reply with any additional details and I will help you correct this problem.

Read More
Fred M -
Sears Technician
July 29, 2012
See more answers

Top Parts