Model #11077092600 KENMORE ELITE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8557891 Burner Assembly, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

What is the capacity of this machine? 11077092600 Kenmore Elite Dryer

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the capacity of your washer. I did look into the model number you have provided, and I do apologize we do not have access to the cubic feet for this model. After 5-10 years the manufactures stops giving certain information out. In order to get the capacity you will need to measure the unit. 

Calculate Washer Tub capacity


This is a geometric method to calculate tub capacity based on the cylinder volume formula. Unfortunately, the value could be as much as 25% off from the manufacturer stated capacity.

Why? Because the tub is not exactly a cylinder. The edge where bottom connected to the wall is not at 90 degree angle but smooth and rounded. The water line is not clearly marked and the bottom is not always flat. Finally, an agitator also takes capacity away from the tub.

This method can be used as a crude estimate but we do not recommend using it for comparisson when shopping for a new washer.

Determine your washer tub capacity by taking two simple measurements:

Top Loading Washer Tub Capacity Measurements

1. Use the ruler to measure the depth of the tub (indicated by the red line on the diagram)

2. Now find the distance accross the tub, the diameter (the green line on the diagram). Note that some tubs are narrow on top. In this case make the measurements INSIDE the tub.

Solution:

Tub Depth: in.   Tub Diameter: in.


You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
August 05, 2014
Q:

L.P. to natural gas 11077092600 Kenmore Elite Dryer

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Sears recommends to have a licensed natural gas technician perform the reconversion back to natural gas for your safety.
There is not a conversion kit back to natural gas from propane. You will need to remove the LP orifice and replace it with the Natural gas orifice part# 15418 and remove the blocking pin from the pressure regulator. Remove the little vent cap on the regulator and remove the "blocking pin" and then reinstall the vent cap. You will also want to replace the leak limiter, part number 694424. 
Hope this helps and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
March 17, 2014
Q:

Dryer filter housing issue 11077092600 Kenmore Elite Dryer


Top Parts