Model #11076960130 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Dryer 110.76960130 won't turn on

A:

Having issues with our Dryer can ruin our laundry day. While you are waiting on an expert to answer your question, I suggest you set service with a Sears technician at SearsHomeService.com so they can fix this for you. Hope this helps!

Read More
Dezeray S -
April 23, 2013
A:

It sounds like you have a problem with the voltage supply to the dryer that is causing this failure. Here is a link for a brief video that shows how to test the voltage at the dryer outlet: Video: Perform a Voltage Check on a 240 Volt Outlet  

 

If you are not getting the 120 volts on each leg at the dryer outlet, then I recommend that you have an electrician repair that circuit. 

 

If you need more help, reply with additional details and we will assist you further. 

Read More
Lyle W -
Sears Technician
April 24, 2013
A:

The link for the video that I provided in the above response does not work properly. Here is the URL that you can copy and paste into your browser: http://www.managemylife.com/mmh/articles/authored/video-how-to-perform-a-voltage-check-on-a-240-volt-outlet

Read More
Lyle W -
Sears Technician
April 24, 2013
A:

Considering rewiring to bypass sub panel box. It is for dryer only and have breaker in main panel. Would connect red and black leads to each other. If I get 240V at dryer plug, should work. Should I then replace sub panel or is main breaker enough protection?

Read More
JEdwardsMC -
April 25, 2013
A:

I don't recommend that you try to bypass that sub panel box. If you are not getting proper voltage at the electrical outlet for the dryer, I recommend that you have an electrician check the circuit and repair the components.

Read More
Lyle W -
Sears Technician
April 25, 2013
A:

Opening the breaker for the dryer in my main panel shuts off power to sub panel. I took the hot wires in the 2 30amp sub panel box and connected them to each other and the dryer gets 240V and runs. Since I have breaker protection in the main panel also, do I need to replace the sub panel box or can I remove it?

Read More
JEdwardsMC -
April 27, 2013
A:

I recommend that you check with a local electrician. There may be local electrical codes that govern that circuit.

Read More
Lyle W -
Sears Technician
April 29, 2013
See more answers
Q:

dryer door cables broken

A:

I understand that your dryer door cable are broken. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Alina F. -
January 26, 2012
A:

Thank you for your question.

I see that Alina F has given you a link to a previously answered question. I recommend clicking on the link and following the advice.

Please feel free to reply below with more details if you need further assistance on the dryer.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 27, 2012
See more answers

Top Parts