Model #11076922502 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8576353 Burner Assembly, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

smell gas when turn on and doesn't heat up. 11076922502 Kenmore Residential dryer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model 11076922502

; It’s going to be best to turn off the gas supply and not use it until it has been serviced by a technician.

We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 08, 2014
A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model 11076922502

; It’s going to be best to turn off the gas supply and not use it until it has been serviced by a technician.

We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 08, 2014
See more answers
Q:

How do I access the drum of the dryer? 11076922502 Kenmore Residential dryer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Joseph P. -
March 19, 2013
A:

Thank you for contacting Sears with your dryer question Charlotte. I am so sorry to hear something is caught in the drum. I can understand how concerning the dryer making a terrible noise can be. I will be happy to help you with accessing the drum. Before you open up the dryer you want to be sure and disconnect the power source. You can unplug it, remove the fuse for the dryer from the fuse box, or flip the breaker for the dryer. To help you with the repair, I have included the link for you to view the parts diagrams.

Click here to view Parts Diagram for model 11076922502

You will need to remove the end caps on the control console. (Lift from the back and pull them towards you.) You will then be able to see and remove the screws that hold the console in place. Once the screws are removed the console will flip back. You will find three screws at the back of the cabinet top. Remove these and slide the cabinet top forward and lift it off the unit.

Next remove the toe panel. There are two retainer clips that need to be disengaged before you can remove the toe panel.  Use something thin, a flat object to fit in between the front panel and the toe panel. Next open the dryer door and remove the screws that are holding the hinges to the door. Tilt the door up and pull on it gently to remove it. Continue the dismantling process by removing all the screws you find that are holding the front panel to the unit. There will be door switch screws, ground wire screws, and other screws holding the front panel to the bulkhead. Be careful taking the dryer apart. There are several wires in there that you may need to disconnect and reconnect after you have completed repair. I recommend labelling the wires as you disconnect them to make it easier to hook them back up later.

If you want step-by-step instructions with color photos, I have included the link to order the do-it-yourself repair manual.  
 
Repair manual

There are several wear items in a dryer that can cause noise when they begin to give out. They are all contained in a dryer maintenance kit which comes with installation instructions. The kit is a huge savings over buying the parts individually. I have included that link for you also.

Maintenance kit for model 11076922502.

While you have the dryer dismantled, I recommend cleaning out the exhaust system. If you notice a lot of lint build up in the lint trap, I recommend investing in a lint brush to help keep that from becoming a fire hazard.

Lint brush 

Charlotte, if I can be of further assistance  please respond back to this thread. Thank you for choosing Sears, we appreciate you as our valued customer. 

Read More
Rachel Morgan -
Sears Technician
March 19, 2013
See more answers
Q:

My Residential Kenmore Elite gas dryer 110.76922502 does not heat up. I have already replaced the Thermal Fuse. What is the next thing I should check?

A:

I know how important it is to have a good working dryer in the home so that you can have your washed clothes nice and dry. While you are waiting for an expert answer, I did manage to find a link that describes a similar problem to the one that you are having. I hope my link is useful.

Read More
Joseph P. -
January 17, 2011
A:

Thank you for providing the information on replacing the thermal fuse already; I'm sorry this did not fix the dryer. I suspect you are familiar with access since you replaced the thermal fuse yourself. But if you need access instructions please let us know.

In the diagram provided below I have outlined the path of voltage from source to the igniter.

All of the components in the path have to read closed continuity on an ohmmeter & the igniter should read 40 ohms.

Please click on the image below.

The first responder's link has good info also but is not for this model.

Use caution around sharp metal edges & don't forget to disconnect power.

  • flame sensor 338906
  • oper thermostat 3387134
  • thermal cutoff kit 280010
  • igniter 279311 order parts here

Read More
biker dave -
Sears Technician
January 18, 2011
A:

Biker-D, My thought is to skip the diagnostics and replace all four components. 3387134, I see on the drawing, and access should be no trouble. 338906 is not as obvious; can I access this part through the front panel? 279311 I see on the Gas System, but where is this in a higher assembly. Can I access this from the front? 280010, and just cannot find on any of the exploded views. Do you have a print for this, and can I access it from the front? If I cannot access these items from the front, do I need to remove the drum? Thanks- David

Read More
David -
January 18, 2011
A:

Thank you for the follow-up. After opening the front lower inspection panel you will see the blower on the left & burner on the right. It is not necessary to remove the drum for the repair but you can if you want for cleaning. I sent you the drum removal instructions in the first image. In the second image I sent you access instructions for the burner assembly; the gas line is removed from the back on this model. Also, on this model the high limit thermostat does not need to be the kit; you can use the single high limit thermostat 3403140. Disregard the 280010 kit part number. The flame sensor (338906) is on the side of the burner funnel & the igniter (279311) is in the middle, see image. The operating thermostat (3387134) is on the blower housing, see image. In the image provided I have outlined each component listed. Remember to disconnect power before attempting access & use caution around sharp metal edges.

Read More
biker dave -
Sears Technician
January 19, 2011
See more answers

Top Parts