Model #11076914690 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • 3402243 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Broken Belt Switch - Kenmore Dryer

A:

When there is a broken part in our appliances it can be really concerning especially when we think about how much money its going to cost to fix. While you are waiting on an expert to answer your question, a suggestion I have is to set service with a Sears technician so they can fix this appliance right way. I have attached t he link below. Hope this helps!

Read More
Dezeray S -
March 06, 2012
A:

Thank you for your question on wiring the new motor to the broken belt switch harness.

I will send you a picture of Mark T image of the motor connections for you.

The blue as you can see in the picture from the broken belt switch goes to terminal 4 back side of the switch behind the Molex plug. .

The Yellow/green ground wire goes next to the red wire on the far right side and is s chassis tab to ground the motor.

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
March 06, 2012
See more answers
Q:

kenmore series 90 gas dryer. model 110.76914690

A:

I know how important it is for you to replace the motor in your dryer in order to do your laundry. I researched your question and was unable to find information that would help you with the issue your having. An expert will respond shortly. Have a good day.

Read More
Jackie S -
March 02, 2012
A:

This appears to be a duplicate question. Here is a link for the answer to that identical question that should help you complete that repair: kenmore series 90 gas dryer. model 110.76914690 . If you need more help, let us know.

Read More
Lyle W -
Sears Technician
March 05, 2012
See more answers
Q:

kenmore series 90 gas dryer. model 110.76914690

A:

I know how important it is for you to replace the motor in your dryer in order to do your laundry. I researched your question and was unable to find information that would help you with the issue your having. An expert will respond shortly. Have a good day.

Read More
Jackie S -
March 02, 2012
A:

Here is a link for a repair video that shows how to replace the drive motor on that dryer: Dryer Drive Motor Replacement . Be sure that you unplug the dryer before accessing internal components. That video shows how to remove that blower fan. It is reverse threaded so you will need to rotate it clockwise (to the right) to remove that fan. A square 1/2" drive will fit in that opening at the front of the fan to break it loose. This information should help you with that repair. If that fan is damaged, you can order a replacement from the Sears PartsDirect website. The part number for that fan is 697772. Here is a direct link for that part: Blower Wheel .

You can chip that old fan off of the shaft of that motor if necessary to remove it (assuming that you will already need to replace it anyway).

I hope that this information helps. If you need more assistance, reply with additional details.

If you happen to get to the point where you need to have a service technician complete this repair, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 05, 2012
See more answers

Top Parts