Model #11076814690 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Dryer won't heat 11076814690 Kenmore Gas dryer


Hello glad to help.  Thank You for choosing Sears
I am sorry and do understand your frustration when the dryer stopped heating.
Glad to help out.   Im  looking at your Kenmore Dryer model number 110.76814690.

First thing for safety and concerns to keep dryer running well is to check the lint screen and vent of air flow going out of the house.   If clogged up it could cause heating problems on any dryer.
To prevent a Blocked Vent Hood, once a year: 
1.  Clean any lint blockage from the exhaust vent hood.
2.  Make sure the vent hood flappers move freely.
3.  Check for screen/grate openings that allow bird or rodent nests.
4.  Replace exhaust vent hood if damaged.
5.  Check for good air flow while running the dryer.
Note: Poor airflow or decreased airflow indicates further vent system cleaning is needed.
All items can be checked with a volt meter for continuity.
When a gas dryer isn't heating there are a few things to look at.
In the burner system you have
1.  The ignitor key number 64 at lower left corner
2.  The pair of coils 71 & 72 at lower left corner
Behind the blower there is
3.  The thermistor key number 41 on blower page
4.  The thermal fuse  key number 39 on blower page.

Picture of the ignitor and coils for this model

picture of the fuse and thermostats for this model

Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs. Thank you for choosing Sears and using our

Read More
Larry L -
Sears Technician
March 17, 2014

How do I change the thermal fuse on my Kenmore dryer?


The thermal fuse that you need to change can be accessed through the back panel on this model of dryer. Follow these steps to change this fuse:

  1. Unplug the dryer to completely disconnect electrical power.
  2. Remove the screws from the back panel. Pull the back panel off of the dryer and set it aside.
  3. Disconnect the wires from the thermal fuse (see image below for location).
  4. Remove and replace the thermal fuse. Reverse the above process for reassembly.

Read More
Lyle W -
Sears Technician
June 18, 2008

wrong info looks like back panel cannot be removed on this model - 110.66912692

Read More
Walter -
June 13, 2012
See more answers

Top Parts