Model #11076812694 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • 3402844 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dyer wont start 11076812694 Kenmore Gas dryer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Marc -
June 02, 2013
A:

Hi,

 Thanks for contacting ManageMyLife. I understand how frustrating it is having trouble with your appliance not working.

The best is to check the voltages from the timer to the push to start switch.  This is located inside the console and the access is to remove the console rear panel to do the checks.  The checks are live voltage checks!

To do the check turn the timer on to timed dry, and then takes the voltage reading across the push to start switch.  If the motor and the belt switch are working the reading will be 120 volts AC.  If the reading is 0 volts AC the belt switch or the motor switch could be faulty. 

NOTE:

  Always unplug or de-energize electrical equipment before removing covers or attempting service.

Be careful and wear appropriate hand protection when working around sharp metal parts.

NOTE:  Live voltage checks are dangerous, and possibly deadly. Exercise caution at all times.

If you are not comfortable working with live electricity I recommend you call a Sears Home Services technician.

 

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
June 06, 2013
See more answers
Q:

Kenmore gas dryer #11094832200: When I purchased this new from Sears, it was set up for LP. Now that I have natural gas in my home, I want to convert to

A:

I'm sorry to hear that you are having some difficulties with your dryer. I did some research for you at Managemylife.com and found an excellent article/video that may help until your expert can respond to your specific question. The link is attached below.

Read More
aashe -
October 10, 2011
A:

There is not a kit for converting the dryer back to natural gas. You will need two parts to complete that conversion. You can order parts from the Sears PartsDirect website. The first part that you need is the natural gas orifice part number 234826. Here is a direct link for that part: Orifice . The second part that you need is a limiter cap for the regulator (part 694424). Here is a direct link for that part: Limiter .

NOTE: This conversion should be completed by a qualified installer.

The installer will need to reverse the LP conversion instructions that are shown in the images below (4 pages). The basic conversion involves replacing that orifice with the natural gas size and pulling out the blocking pin on the regulator and replacing it with the limiter cap. Be sure that the installer unplugs the dryer and shuts off the gas supply before accessing internal components.

The access information shown in those images is for a slightly different dryer than yours. Here is a video that shows how to access the burner assembly in your type of dryer: Dryer Valve Coil Replacement . NOTE: You do not need to replace those gas valve coils for this conversion. That video should just be used for accessing the burner assembly .

These tips should help you get that dryer converted back to natural gas. If you need more help, reply with additional details.

If you need a qualified installer to complete this conversion, you can contact your local gas supplier. You may also be able to find a pre-screened service provider on the ServiceLive.com website that can complete that conversion. Here is a link for that website: ServiceLive.com .

Read More
Lyle W -
Sears Technician
October 11, 2011
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
October 11, 2011
See more answers
Q:

Converting a dryer back to natural gas that was converted to use LP gas.

A:

I understand that you want to convert your dryer back to natural gas. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day.

Read More
Alina F. -
September 08, 2011
A:

Thank you for your question and I understand your concern.

There is not a conversion kit to convert the dryer back to Natural gas.

To convert the dryer back to Natural gas:

1.Remove the LP orifice 2.Install the Natural gas orifice 3.Remove the regulator vent cap 4.Remove the blocking pin. 5.Re-install the regulator vent cap and you're done. The part number of the Natural gas orifice is #234826 which can be ordered from Sears PartsDirect

I added the instructions to convert the dryer to LP and so that you will have them for future reference. Basically, reverse the procedure to convert the dryer back to Natural gas.

Read More
Fred M -
Sears Technician
September 11, 2011
A:

Hello Fred M, Thank you for your help. I have a couple more questions concerning this. I know that this may sound like I'm worring too much but like I said, I don't want anything to happen to my family because I wasn't willing to do my research. Do I need to worry about having any the pressure turned down at all since, I'm going back to NG? Also in your response, #3 you mention to remove the regulator vent cap (is this #15 or #16)? #4 Remove the blocking pin. (Do just break off the blocking pin from the brass pc. I have a photo of the LP gas conversion kit (p/n: 49572) for this dryer. It shows what appears to be 2 orifices & a brass pc with the blocking pin on it)? #5 Re-install the regulator vent cap (Is the limiter #15 the vent cap you speak off)? The #'s I mention above are from the parts break out (Schematic) that's for this dryer model #. Can you please look at this schematic so that, my questions make sense. On this schematic, the progression of parts on bruner starting on top and going down. Limiter, then under that, the regulator and then the spring. With this being said, how do these pcs relate to what you said above. Again, I'm sorry if my questions seem to sound like I'm over complicating things. I just want to make sure everything is safe. Please let me know and, thank you for your time, Don

Read More
Don -
September 11, 2011
A:

The instructions are for converting a natural gas dryer to a propane/butane dryer. You would need to reverse the steps. The blocking pin would be removed and not added. My best suggestion would be to have a technician do this change over. Mistakes might lead to bigger problems and dangerous outcomes. You can find a technician at the link at SearsHomeServices.

Read More
Fred M -
Sears Technician
September 13, 2011
See more answers

Top Parts