Model #11076801693 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • 3402844 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why is my dryer not turning?

A:

The belt is accessed from the front on this model. First unplug the power to the dryer. Pull out the lint screen & remove the 2 screws that go down through the top panel. Slide the top forward far enough to release the hold down clips & lift the top up. Remove the 2 screws holding on the front panel to the side panels. Pull the front panel up off of the lower clips. You will now be able to see the belt. See the attached image for the belt routing.

Read More
biker dave -
Sears Technician
October 28, 2008

Top Parts