Model #11073956102 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dryer model #110.73932101 does not flair up

A:

I see your Dryer is not drying all the clothes and the ignitor isn't glowing. I found a question in Manage My Life under the Answers button that was similar to the one you asked. I think this information will give you some very helpful suggestions on what might be going on. I attached the link below, I hope this helps!!!!!!!!!

Read More
Raquel F -
August 31, 2010
A:

Your details seem to imply that the dryer will not stay running unless you hold the push-to-start button down. Here is a link for a previous answer that provides troubleshooting for this type of problem: Why does my Kenmore dryer model 110.73956102 stop running when the start switch is released?

If the start sense wire is okay, you can try switching the motor relay and heater relay as described in the previous answer link above (with the dryer unplugged ).

If you get the motor to stay running properly, then the dryer may heat properly.

If you need more help, submit additional details and we will assist you further.

The control system in this dryer is not that easy to diagnose and repair. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
September 01, 2010
See more answers
Q:

My Kenmore 11063952101 electric dryer won't stay on. If I press and hold the start switch it will run, but when I release it stops.

A:

Hi, I can see how that would be frustrating. While I was researching your question I see that someone else on Manage My Life has asked a similar question. I included the link below. Hope this helps!

Read More
Salina L -
July 21, 2010
A:

This type of problem is often caused by a failed motor relay in the console. It can also be caused by a wiring failure or a failed electronic control board. Here is a link for a previous answer that describes troubleshooting for this type of failure: Why does my Kenmore dryer model 110.73956102 stop running when the start switch is released?

Read More
Lyle W -
Sears Technician
July 23, 2010
See more answers
Q:

Kenmore dryer model 110 73942101 start button does not stay on. New switch does not solve problem.

A:

Hello, I can see you are having problems with your appliance. If you would like you may visit the sears home services website. I have attached the link below. I hope this helps.

Read More
Flo R -
July 17, 2010
A:

Here is a link for a previous answer regarding the exact same problem on an identical Kenmore dryer: Why does my Kenmore dryer model 110.73956102 stop running when the start switch is released?

If you follow the troubleshooting steps in that answer, you will likely be able to resolve this issue in your dryer. Be sure that you unplug the dryer and shut off the gas supply before accessing internal components.

If you need more help, submit additional details and we will try to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
July 20, 2010
See more answers

Top Parts