Model #11073952102 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Elite Gas Dryer not heating 11073952102 Kenmore Gas dryer

Q:

Dryer tripps breaker

A:

The problem with the dryer tripping the breaker can be very frustrating. I found some information for you that I am hoping will be able to help you out. Please click here:Dryer Trips Circuit Breaker. Your expert will also help answer your question. It may take two business days for your expert to reply. I do hope that everything works out on the dryer.

Read More
Marc -
April 02, 2013
A:

Hi,

Thanks for contacting ManageMyLife. I understand how frustrating it is having trouble with your appliance not working.

If your dryer has to have the door closed to stop tripping the breaker, I would start at the door switch.  This switch and the drum light circuit seems to be the fault with the dryer. This would indicate the drum light does not work.  It could be the wires of the light socket. 

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
April 03, 2013
A:

We I changed the door switch, replaced the power cord and looked for the non existing light wire loom by removing the drum and the back plate. It�s still tripping the breaker. Thanks for trying to help.

Read More
steve -
April 09, 2013
A:

The problem is it is not the door switch but the harness wires to the light or the light socket. Try to disconnect the wire from the door switch to the light and see if the dryer acts Ok.

Read More
Bill__W -
Sears Technician
April 09, 2013
A:

I already looked for the wire loom for the light. There is a socket there but no wires. I took out the drum and the back plate it rides on and nothing. Also none of the existing wires look as if anything has been cut from them so I�m not sure where they would have connected to if they were there. There are three wires to the door switch. The one to disconnect would be? The dryer is located in a House my son just bought so we don�t know its history but are trying to keep it working to save him some money.

Read More
steve -
April 09, 2013
A:

oh and my bad it's a kenmore 90 not a 70 model if that makes a differance.

Read More
steve -
April 09, 2013
A:

The brown is the one to disconnect and test.

Read More
Bill__W -
Sears Technician
April 09, 2013
A:

ok cutting the brown wire worked. thank you so very much for your help!!

Read More
steve -
April 17, 2013
See more answers
Q:

How can I replace the door switch for my Kenmore Dryer ?

A:

I understand that you want to replace the door switch on your Kenmore dryer. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
December 28, 2012
A:

I understand wanting to replace the the door switch on your dryer. I'm happy to help you today. Make sure to unplug or turn the power off before servicing. Then click here to watch a video on how to replace the door switch.

Parts can be purchased from Sears PartsDirect.com .

I really hope this information helps you today. Thank you for using ManageMyLife.com.

Read More
Korinna S -
Sears Technician
December 28, 2012
See more answers

Top Parts