Model #11073932102 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Dryer won't stay on 11073932102 Kenmore Gas dryer

Q:

Dryer model 11073932102 drum spins however burner won't lite 11073932102 Kenmore Gas dryer

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dryer and I do understand your frustration. Glad to help out. I'm looking at your model number 11013932102 and from your description I would suspect that the coils are not opening to allow the gases to be released and ignited. Here is a link that will help test the coils, and thermostat. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
November 17, 2014
Q:

My model 11073932102 Dryer is not working properly 11073932102 Kenmore Gas dryer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the gas dryer.
 
Glad to help out.   Im  looking at your Kenmore Gas Dryer model number 11073932102.

First thing for safety and concerns to keep dryer running well is to check the lint screen and vent of air flow going out of the house.   If clogged up it could cause heating problems on any dryer.
 
To prevent a Blocked Vent Hood, once a year: 
 
1.  Clean any lint blockage from the exhaust vent hood.
2.  Make sure the vent hood flappers move freely.
3.  Check for screen/grate openings that allow bird or rodent nests.
4.  Replace exhaust vent hood if damaged.
5.  Check for good air flow while running the dryer.
Note: Poor airflow or decreased airflow indicates further vent system cleaning is needed.

GAS DRYER PROBLEMS:
 
All items can be checked with a volt meter for continuity.
 
When a gas dryer isn't heating there are a few things to look at.
 
In the burner system you have
 
1.  The ignitor key number 4 on burner page
 
2.  The pair of coils 13 & 14 on burner page
 
Behind the blower there is
 
3.  The thermistor key number 42 on blower page
 
4.  The thermal fuse  key number 59 on blower page.

Ignitor page for the model 110.7392102

Blower page for the model 110.7392102

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
May 28, 2014
A:

I cleaned the unit completely, not much lint, this dryer is on an outside wall with only 12" of pipe before the flapper. When I start the dryer the burner lights and continues running. It will not relight when it calls for more heat later in the drying cycle. The ignitor glows however the gas valve does not open, then the ignitor times out. Any ideas on what is causing this problem. Thanks, Joe

Read More
Joseph -
June 01, 2014
A:

Model 110.73932201 will not ignite. I checked the ignitor key # 4 on blower page and it has power. I also checked the pair of coils # 13 & 14 on the blower page no power. I also checker the Thermistor # 42 no power and the Thermal fuse which has power. Any ideas on what is causing the problem?

Read More
Joseph -
November 10, 2014
See more answers

Top Parts