Model #11073032102 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Auto Moisture Sensing mode does not work 11073032102


Auto Moisture Sensing won't work 11073032102


Thank you for choosing and being a valued member.  I can certainly understand how frustrating it can be when your dryer is not working properly.

Activating the Test Mode

1. Set the following configuration:
? Door - must be open
? Signal switch - HIGH
SENSING PLUS selection
2. Turn the Fabric Care/Temperature switch
from AIR FLUFF to ULTRA DELICATE three times within a five second period. A double beep, pause, double beep will sound to indicate that the factory test mode is activated. 

Test Mode Functionality
When the control is in the Factory Test mode,
every input change of state will result in a beep
(with the exception of the Signal switch). This
? Door switch
? Moisture Sensor (short/open Sensor will
result in a beep) NOTE: A moistened
finger or damp cloth may also be used.
? Fabric Care/Temperature switch
? Push To Start (PTS) switch (with the
door switch closed)

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 12, 2015
Natasha12 -
Sears Technician
August 12, 2015
See more answers

Dryer runs flame goes out 110.7032102


Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon research model number 110.7032102; being that the burner lights the igniter is ok .The gas coils seem to be going out due to the unit not relighting. The coils could have to be replaced  .

Thank you for choosing Sears. We appreciate your business. Have a great day

Read More
Jeff Wallace Jr -
Sears Technician
December 08, 2014

Top Parts