Model #11072832101 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My dryer has no heat. Any thoughts? 11072832101 Kenmore Gas dryer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model number11072832101; it could be the thermal cut-off is burned out. You could test it for continuity. If it has no continuity then it could need to be replaced.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
December 17, 2014
A:

Thanks. Do you have a part number for that. I cannot find it in the parts search.

Read More
Tracy -
December 19, 2014
See more answers
Q:

I have kenmore 80 series gas dryer. It works for about 5- 10 mins then it stops producing heat. Any ideas what the problem would be?

A:

Hello, Dryers are very convenient appliances, so it can be frustrating when they're not working properly. I researched your question and found that someone asked a question similar to yours. Here is what was posted by an expert, I have provided the link below. I hope this helps!

Read More
Jacqueline S -
July 08, 2010
A:

I added the answer to your question in the link below.

Why does my dryer quit heating after 10 minutes?

Read More
Joey S -
Sears Technician
July 12, 2010
See more answers
Q:

Why does my kenmore gas dryer stop heating in the middle of a cycle?

A:

Hello, Dryers are very convenient appliances so it can be frustrating when you no longer have that convenience at hand. I researched your question and found someone had a similar problem. Here is what was posted by an expert, I have provided the link below. I hope this helps!

Read More
Jacqueline S -
July 08, 2010
A:

The link that Jacqueline S provided in the first answer will pertain to your model and symptom.

Read More
Joey S -
Sears Technician
July 12, 2010
See more answers

Top Parts