Model #11072062100 KENMORE Residential Dryer

  • Console Panel
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Dryer Top
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do you remove the bottom panel from the front of the dryer 11072062100 Kenmore Gas dryer

A:

Thanks for the inquiry and for being a valued member.

To remove the toe (service) panel, you will need to get a putty knife and release the retainers about 3" in on either side. Once they are released, tilt the panel forward and up to release from the bottom clips. There are some great YouTube videos you can watch to see how it's done before tackling the job. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 27, 2015
Q:

dryer not drying completely

A:

Good morning.... There could be several basic reasons that could cause a dryer to dry slowly. I did a model number search and I was able to locate a link that will address your particular situation. Review the data therein and also keep in mind that you will hear from an expert within the next two business days if not sooner. I hope this is helpful and have a nice day

Read More
Henry -
November 02, 2012
A:

Thank you for submitting your question. Henry has provided you with good information. You may be experiencing an issue with the vent system. I recommend following the instructions of our Expert Joey. If you're still experiencing issues, the problem will be with the operating or high limit thermostat. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
November 03, 2012
See more answers
Q:

dryer not drying completely

A:

Good morning.... There could be several basic reasons that could cause a dryer to dry slowly. I did a model number search and I was able to locate a link that will address your particular situation. Review the data therein and also keep in mind that you will hear from an expert within the next two business days if not sooner. I hope this is helpful and have a nice day

Read More
Henry -
November 02, 2012
A:

Thank you for submitting your question. Henry has provided you with good information. You may be experiencing an issue with the vent system. I recommend following the instructions of our Expert Joey. If you're still experiencing issues, the problem will be with the operating or high limit thermostat. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
November 03, 2012
See more answers

Top Parts