Model #11070982990 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • 3402851 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dryer starts when empty but not with load 11070982990 Kenmore Gas dryer

A:

Thank you for Choosing SearsPartsDirect.com. I defiantly understand the frustration when the dryer is not performing for you. I will be more then happy to assist you.

Looking at the information on the Kenmore Model 11070982990. When is not spinning with a load and will with no load the belt is worn out. Its worn enough that under load it wont spin, but still intact to spin when not load.

I recommend changing the belt. Click her to find out more information and ordering. Now since your going to be in there replacing the belt, I also recommend replacing the support rolls, idler pulley ass well. Click here for a dryer tune up kit for your kenmore dryer.

Hope this information has help you, any futher questions or concern please feel free to comment back. Thanks.

If you are not comfortable doing this repair you can Click Here to schedule a technician or call toll free 1-800-469-4663

 

Read More
Samantha A -
Sears Technician
May 06, 2014
Q:

Dryer 11070982990 stops drying during auto dry program

A:

Hi,

Thanks for contacting  ManageMyLife.  I understand how frustrating it is having trouble with your appliance.

To me it sounds like the moisture sensors are dirty.  Use the factory test to check the sensors.  If you use softener in the wash, or dryer sheets in the dryer, this could leave and invisible coat on the sensors.  The sensors work by having the wet clothes short between the two sensors and if this shorting effect is not happening, the dryer will think the load is dry and move the timer to the off position.  In the factory test the door can be opened and a small wet cloth placed across the sensors, this would cause a beep if the short is seen.  If not I would recommend you clean the sensors with a solution of dishwasher detergent and water scrubbing the sensors clean and then run the test once more.   

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
October 01, 2013
Q:

Kenmore dryer model # 11072942100

A:

To help the expert give you a more detailed response, let me state, that a dryer runs on two breakers, one for the machinery and one for the heating element. Lets make sure it's not a breaker issue by shutting both breaker off for 5 minutes then turn them back on. This will reboot your dryer. This may also remedy your situation instantly. Also, review the link I've provided below. An expert will respond to your question within a day or two. I hope this helps you and have a nice morning.

Read More
Henry -
October 02, 2012
A:

I desperatly need to get this dryer working.

Read More
Donna -
October 02, 2012
A:

thanks for the above potential fix. It did not work.

Read More
Donna -
October 02, 2012
A:

Here is a link for a previous answer that has some troubleshooting that pertains to your type of dryer: Kenmore Dryer Model #110.70982990 .

I recommend that you begin checking those components. If you need more help, reply with additional details.

Read More
Lyle W -
Sears Technician
October 03, 2012
See more answers

Top Parts