Model #11070882991 KENMORE Residential Dryer

  • Cabinet
    3 Results
  • Top And Console
    3 Results
  • Bulkhead
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Whats the problem with my Kenmore gas dryer whose burner starts okay but died down after a few minutes. 11070882991 Kenmore Gas dryer

A:

Thank you for your inquiry on your Kenmore Dryer, Model: 110.70882991. From reviewing the details on your model, Check to make sure it is not bent or kinked. If the air flow is restricted then the flame spreads out and hits the high limit thermostat which short cycles the flame. The flame will keep coming back on even though it only stays on for a short time. Try running a medium wet load and see if the flame stays on any longer. If the flame shuts off after a couple of minutes and then never comes back on then the problem can be with the gas coils. If the igniter glows and clicks off but there is no flame then the coils are most likely to blame. 

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dryer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
June 04, 2015
A:

Thank you very much. I really appreciate it. I'll be in touch. Have a nice day

Read More
Rocky -
June 05, 2015
See more answers

Top Parts