Model #11070094990 KENMORE Residential Dryer

  • Console Panel
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Dryer Top
    3 Results
  • 3402851 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Gas dryer conversation

A:

I know how important it is to have the proper kit to convert the dryer to assure it will work properly. While you are waiting for your expert answer, I did some research on the dryer. At this time, I was unable to locate information that would be helpful in regards to your question. Your expert will answer within 24 to 48 hours with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
January 07, 2012
A:

You will need the LP conversion kit that is part number 695237 to complete that conversion. You can order that kit from the Sears PartsDirect website. Here is a direct link for that part: LP Conversion Kit .

The images below show the basic instructions for converting that dryer to LP gas. The last image shows how to remove the bottom front service panel to access burner assembly.

The dryer must be unplugged and the gas supply should be shut off before performing that conversion.

NOTE: This conversion should be completed by a qualified installer.

You can contact your local gas supplier for a qualified installer to complete this conversion. You may also be able to find a pre-screened service provider on the ServiceLive.com website.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
January 10, 2012
A:

Here are the additional images. The installer should be able to access the burner assembly using that procedure shown in the last image. The dryer should be UNPLUGGED and the gas supply should be shut off before accessing internal components.

Read More
Lyle W -
Sears Technician
January 10, 2012
See more answers

Top Parts