Model #11070072990 KENMORE Residential Dryer

  • Console Panel
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Dryer Top
    3 Results
  • 3402851 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Stuck on one cycle 11070072990 Kenmore Gas dryer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model11070072990; unplug the unit for about five minutes. If it’s causing the same issues it could be the user interface or the control board needs to be replaced. There are special diagnostic tools used to test the boards. Also static electricity or mishandling the board can damage it. I would recommend calling our repair department to have a tech diagnose the unit.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
November 04, 2014
A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model11070072990; unplug the unit for about five minutes. If it’s causing the same issues it could be the user interface or the control board needs to be replaced. There are special diagnostic tools used to test the boards. Also static electricity or mishandling the board can damage it. I would recommend calling our repair department to have a tech diagnose the unit.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
November 04, 2014
See more answers
Q:

Kenmore Elite Dryer Model Number: 11070072990. When you plug it in it flashes PF once, then shuts off.

A:

I'm sorry to hear that you are having some difficulties with your Kenmore dryer . I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Barbara H. -
October 16, 2011
A:

Thanks for contacting ManageMyLife.com. The first link Barbara H. provided above is going to assist you with your PF issue. You may click here to view that expert answer.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. You may visit SearsHomeServices.com and click on the red Start now button.

I hope this helps!

Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
October 18, 2011
See more answers
Q:

I got KenmoreEllite model No. 11070072990, the fault No. 40. The blower works. Is it the two red thermistors coming out of lint sensors?

A:

It can be stressful trying to diagnose a problem with your dryer. I researched your question and found a link that may assist you while your waiting for an expert to respond. I have provided the link below. I hope this helps! http://www.managemylife.com/mmh/questions/141809-kenmore-dryer-model-41788042700-keeps-beeping-and-the-lights-on-the-control-panel-keep-blinking-what-can-i-do

Read More
Jacqueline S -
October 25, 2010
A:

Based on the symptom and details, the console has a shorted key pad. The console assembly will most likely need to be removed and replaced. I also want to inform you that the dryer can only display 3 fault codes; PF, E1 and E2.

I added an image below with instructions on how to test the console assembly. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

The console assembly is part #8282543 at the cost of $184.74 which can be ordered and shipped to your from Sears Parts Direct .

Read More
Joey S -
Sears Technician
October 26, 2010
A:

My gas dryer wont heat up there is no flame at all what could i try to change on it to fix it

Read More
Mike -
November 01, 2010
A:

Mike: I would need to know the model number of your dryer in order to provide any specific instructions on how to access the burner assembly and other related components. Generally speaking the failure could be any one of the components connected in series between the timer and gas valve assembly. Each one including the glow bar igniter must have continuity. Reply with the model number for model specific troubleshooting assistance.

Read More
Joey S -
Sears Technician
November 04, 2010
See more answers

Top Parts