Model #1106957711 KENMORE Residential Dryer

  • Cabinet Assembly
    3 Results
  • Bulkhead Assembly
    3 Results
  • Top And Console Assembly
    3 Results
  • Burner Assembly
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I replace the support rollers on a Kenmore model 110.6957711 dryer?

A:

This is an older dryer and most of the images I have to help you are from newer dryers but the instructions to change the rollers are very similar.

The image below shows you how to access the rollers on most Kenmore dryers but there are some differences with your dryer.

The lint filter and screws are the same and the top raises the same but the front panel on your dryer has a lower access panel that must be removed to access the screws holding the bottom of the front panel. Use a putty knife to push down and pull out on the lower access panel to remove it. Remember to unplug the dryer first.

Before you remove the drum I suggest you take a good look at how the belt is routed around the pulley.

The 2nd image shows how to remove and change the drum rollers.

I hope this information is helpful to you completing this project but submit another question with any additional details for further assistance

Read More
Fred M -
Sears Technician
October 09, 2009

Top Parts