Model #11069532800 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Where do I find the drive motor assembly? 11069532800 Kenmore Residential dryer

A:

Thank You for choosing Sears PartsDirect.com. Glad to help out. Im looking at your model number 11069532800 and the motor is usually located to the right if you are facing the dryer toward the rear. The top will come up inserting a putty knife in each corner. You will need to remove the lint screen and the 2 screws it has in the opening. The front panel has a screw on each top side that will need to come out as well .With the panel removed you can verify where the motor is. If you need to replace the motor you will need to remove the belt from the idler pulley and this will allow the tub to come out.  
 
I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.
 
If you have further questions please resubmit your question with a additional details. Thanks for choosing Sears PartsDirect.com
 
 
 
.

Read More
Sherman_G_Wallace -
Sears Technician
February 24, 2014
Q:

my dryer is working its just not getting hot, what part do i need to order?

A:

When such a handy appliance doesn't work properly it can be very frustrating especially since dryers are not cheap or cheap to repair. I have taken some time to further your search here on Manage My Life and I noticed that someone else had the same issue and asked a question with a posted response from an expert. I have attached the link below if you are interested in viewing while waiting on your response from an expert. Hope this helps, good luck!

Read More
Alina F. -
September 10, 2010
A:

This type of diagnosis will require using an ohmmeter in order to determine the failed part. Please click on the link provided below for complete step by step access, testing & repair instructions. Remember to disconnect power to the dryer before attempting access & use extreme caution when & if checking voltage.

How do I remove the heating element in Kenmore 70 Series Dryer?

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
September 11, 2010
See more answers

Top Parts