Model #11069202990 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dryer goes thru the cycle, everything runs fine, it just does not get hot 11069202990 Kenmore Electric dryer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when the dryer doesn't heat.
 
Glad to help out.  I’m looking at your Kenmore Dryer model number 11069202990.

When it comes to Electric dryers here are all the options to check on when not heating.

All can be checked with an Ohm meter for its continuity open or closed.

You can see all these on the link below when clicked on.

Heating element which is key number 17.

Thermal cut off switch which is both key 21 and key 15 together.

ON the back of the blower is thermal fuse key number 9.

Also on the back of the blower internal thermostat key number 8.

Make sure you always keep your lint screen areas clean.

Heating picture items for model 
11069202990

 Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".

Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry Jr -
Sears Technician
July 30, 2014
Q:

repair question 11069202990 Kenmore Electric dryer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when the dryer is having problems and need it much to work.

Glad to help out.   Im  looking at your model number 110.69202990.

Based on your symptoms.  I highly believe there are 2 things to check on that are common to most dryers.   That is the door switch and the thermal fuse.   First thing and sometimes people get lucky is to open and shut the door harder than usual to see if it will start by doing that.   On the door switch you can take off the wires and then run an OHM meter and see if there is continuity running through them.  Check the Thermal fuse on the back side behind the blower area.  It should read around 10 to 15 ohms.

If  the door switch is bad then I would highly advise you to also get a new door latch/catch.   This will be better to keep the door sealed and no more problems.

Door switch per model 110.69202990

Door latch per model 110.69202990

Thermal Fuse per model 110.69202990

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
September 05, 2013

Top Parts